• High IP protection up to IP67
• Recessed rocker switch prevents accidental switch-off
• Versatile mounting options
• V-Lock cord retention

With the DG12, Schurter launches its most versatile power entry module with IEC inlet, integrated circuit breaker and a mains filter – with optional IP protection. Thanks to its extremely compact dimensions and a wide range of mounting options, it consolidates discrete power components into one space-saving unit suitable for a variety of applications.

The new DG12 filter series from SCHURTER combines an IEC inlet with a TA35 miniature circuit breaker and a mains filter – with optional IP protection. The DG12 is available for almost any mounting variant with snap or screw mounting. In addition, the flange mount version is available in either vertical or horizontal arrangement.

Thermal Circuit Breaker
The DG12 has an integrated TA35 bi-pole circuit breaker. It offers the function of a device switch as well as thermal overcurrent protection. The overcurrent protection is available with a bi-metal switching package on one or two poles and with rated currents from 0.05 A to 15 A. The rocker switch is available illuminated or non-illuminated, as well as in a variety of colours and markings.

IP Protection
In addition to the standard versions with IP40 protection, the DG12 is available in a version with IP67 seal protection to the panel and circuit breaker. The use of the DG12 in harsh environments with dust or splashing water is ensured with a cover for the circuit breaker, as well as sealing gasket and four sealing screws for fastening the flange.

Wide Range of Applications
The DG12 series is certified for currents up to 10 A/250 VAC according to IEC standard and 15 A/125/250 VAC UL/CSA standard. The filter series is available in standard or medical versions and for protection class I and II. For applications that require a particularly high immunity to interference, versions with high inductance filters are available. Such applications for example are IT or telecom systems according to IEC 90650, and medical devices according to IEC 60601-1. The series is compatible with V-Lock cord retention connection cables.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

HVAC is the Heating, Ventilating and Air Conditioning method for conditioning the indoor environment of a building, usually with the intent of keeping the occupant comfortable.

Sensata provides many solutions to monitor this process and make it as efficient as possible. Sensata solutions range from the sensors that allow users to monitor their system to circuit breakers which protect the application.

Click Here →  Sensasta HVAC Systems

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

• New nickel plated steel case
• Complete closed housing
• Extended climatic category 40/100/21

The successful 1 phase filter series FMBB NEO has been redesigned. The new shiny filter housing is made of nickel plated steel and complete enclosed. This ensures better contact with the equipment chassis. With an extended temperature range of -40 up to 100°C the filters can now be used for application with extra low temperatures.

Characteristics
• Designed for current applications of 1 - 36 A
• Protection against interference voltage from the mains
• Possible interferences generated in the equipment are strongly attenuated
• Especially designed for industrial applications such as: Frequency Converters, Stepper Motor Drives, UPS-Systems, Inverters
• Suitable for use in equipment according to IEC/UL 60950
• Suitable for use in medical equipment according to IEC/UL 60601-1

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

What Is It?
The Photoelectric Sensor is an interface which converts a photonic input to an analogue or digital output. It can be used to detect distance, presence or absence of an object using a light transmitter and a photoelectric receiver. The new Photoelectric Automation Sensor Series is a diffuse reflective sensor which can be used to detect objects up to 40mm away.

Why Buy It?
• Simple, secure and efficient design.
• Only require one sensor for your system as opposed to using other technology, such as retro-reflective or through beam.
• Achieve a watertight and dustproof seal to any standard M5 interface.
• Highly robust casing material Stainless Steel 316.
• Withstands a high degree of physical impact.
• Vibration tested to 10-50Hz double amplitudes. X.Y. Z. each direction 2 hours.
• Shock and Bump tested to 1000m/s², X.Y.Z. each direction 6 times.

Key Features:
• Sealed to IP67
• Stainless Steel 316 shell
• Cabled versions with or without connector
• 2M cable length
• <0.5ms response time
• NPN & PNP output
• Detection ddistance 1 - 40mm
• Light point diameter 5.0mm at 30mm
• Power supply voltage 12 - 24 VDC
• Ambient humidity 35 - 85%
• Operating temperature -10 to 50°C
• Small body, just 4.5mm thick

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Chip Fuse for Highest Demands
* Pulse- and temperature-resistant non-aging chip fuse
* Sealed against potting compound
* Meets requirements according to AECQ

With the UAI 1206, Schurter offers a pulse and temperature resistant chip fuse with time-lag characteristics for applications where durability and maximum reliability are requested.

Conventional fuses have a sort of memory. If they are exposed to pulse-shaped current peaks and high temperature fluctuations, their properties change. Every pulse makes the fuse a little weaker, every temperature fluctuation a little more susceptible. Not so with the Schurter UAI 1206.

Pulse and Temperature Resistance
Because of the a special fuse construction, dubbed by SCHURTER as “trace in air” technology, the UAI’s ability to resist current pulses smaller than the melting integral (I2t) is thereby increased exponentially. Comparably, the UAI 1206 has practically no derating to the usual extent. The ingenious design of the fuse body also dampens temperature fluctuations to a high degree. The SCHURTER UAI 1206 is also hermetically sealed against potting compound for use in intrinsically safe applications.

Areas of Application
The new chip fuse, which is offered in two versions with rated currents of 5.3 A and 7.5 A, was specificially developed for automotive applications. The Schurter UAI 1206 meets all requirements according to AEC-Q200. It is also suitable wherever high levels of pulse currents, high thermal fluctuations, and high mechanical loads are present.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Click Below For Video

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Common Mode Chokes for 4 line Applications mount on PCB
• Compact size and light weight
• Open design for optimal cooling
• Nanocrystalline ring cores
• Customer specific pin configurations available

Schurter expands its successful range of current-compensated chokes with a series for 4-wire high-current applications on printed circuit boards. The new DKIH-4 series is available for three phase applications with neutral line at rated currents from 10 A to 40 A. Due to the open design, the chokes are particularly compact and light.

Like most electronic assemblies, the power section is increasingly being mounted on the printed circuit board with discrete components. However, due to the high integration density required to achieve a compact design, thermal problems can arise due to the high currents on the PCB. EMC interference can affect adjacent modules due to the lack of spatial separation. Therefore, a compact filter on the PCB with discrete components is often the best solution. A current-compensated choke with capacitors is the most efficient method of suppressing EMC interference.

The new DKIH-4 series is suitable for three phase applications with neutral line from 10 A up to 40 A . Light weight and compact, the common mode chokes are easily placed on the PCB with through hole technology (THT). The common mode chokes are designed according IEC 60938 and rated 500 VAC or 760 VAC, making them suitable for almost any applications.

The DKIH-4 has been designed for a wide temperature range from -40 °C to +100 °C. In addition to the standard versions, customer-specific pin configurations or variants can be created on request.

Technical Data / Approvals
- Rated voltage: 500 VAC, 760 VAC
- Rated currents: 10 to 40 A at 40°C
- Rated inductance: 0.75 to 6.50 mH
- Other pin outs available on request

Application
- Frequency converters for photovoltaic or energy storage
- Charge stations for electric vehicles
- UPS-systems
- Switching power supplies

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Compact protection for 3-phase systems
* High rated voltages of up to 500 VAC / VDC
* High breaking capacity of up to 1500 A
* Also available as pigtail version (from 1A)

Schurter extends the range of rated currents in the compact high-performance fuse SHF 6.3x32 down to 500mA. The SHF 6.3x32 is a ceramic fuse for higher voltages (AC and DC) with fast tripping characteristics. The high dielectric strength and the high breaking capacity of 1500 A opens up new fields of application.

Schurter now offers the SHF 6.3x32 in nineteen rated currents between 500 mA and 32 A. The high breaking capacity of 1500 A at a rated voltage of up to 500 VAC/VDC characterizes the fuse. Besides a multitude of applications in the energy and industrial sector, the SHF 6.3x32 is especially suitable for the protection of 3-phase systems.

The SHF 6.3x32 is available as a fuse link and a pigtail version (from 1 to 8 A). Fuse links are suitable for mounting in clips and fuseholders, which makes it possible to quickly replace the fuse. SCHURTER therefore offers an extensive range of clips and fuseholders. The pigtail version allows direct mounting on printed circuit boards using THT soldering technology.

The SHF 6.3x32 can be used as RoHS-compliant fuse for lead-free systems. The compatibility with competitor products allows SCHURTER to offer the SHF 6.3x32 as a replacement product. The fuse is approved by cURus.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

* Very high melting integral (I2t)
* Variants up to 50 A (Pigtail)
* Clip and Pigtail versions
* Excellent price-performance ratio

With the SUT-H, Schurter introduces a new 6.3x32 mm ceramic fuse for single-phase applications for high rated currents from 10 A to 50 A. Thanks to a particularly high melting integral, it is particularly suitable for applications where high inrush currents occur.

The new Schurter SUT-H is technically based on the proven SUT. In contrast to the known fuse, the SUT-H has a much higher melting integral, which makes it particularly pulse resistant. High inrush currents, which occur in power supply units, are easily absorbable.

The fuse is offered for direct mounting on the PCB with pigtails or with a solid beryllium-copper clip (Schurter CQP), which allows an easy replacement of the fuse without soldering. The clip can be up to a rated current of 10 A.

The new 6.3x32 mm SUT-H ceramic fuse opens up completely new areas of application by extending the rated current range up to 50 A and opens completely new areas for innovative applications.

The fuse meets the requirements of the UL 248-14 standard, is cURus approved and RoHS compliant. The SUT-H is developed and manufactured by Chi Lick SCHURTER in China.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/