Schurter announces the release of the first 1206 chip fuse series UST 1206 with rated current values up to 25 A and slow-blow characteristic. It boasts high melting I2t values, which provides good inrush withstand performance. It’s a cost-effective solution for applications in which high inrush current and on-off cycling are present.
The UST 1206 with characteristics according to UL 248-14 complements the USI 1206 with characteristics according to IEC 60127-4 . The current ratings of the UST 1206 range from 7 to 25 A with voltage ratings up to 63 VDC and 32 VAC. The device provides a breaking capacity of up to 400 A, and an operating temperature range of - 55°C to +90°C.
The fuse is designed to provide secondary over current protection in applications such as power inverters and back lit DC-AC inverters for monitors, where power consumption is high at a low voltage level, e.g. 5 or 12 VDC. The legend marking on each fuse allows a clear visual identification.
The fuse is approved according to UL 248-14 and holds a cURus approval. The device is RoHS compliant and is supplied on tape and reel either with 1k or 5k or 15k pieces.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Evolution Dual Output SSRs feature new input and output
termination options and higher output power ratings of up to
50 amps/ 660 VAC per channel for greater power density!
Crydom, an operation of Custom Sensors and Technologies (CST) and global expert in solid state relay technology, introduces a new line of AC output Dual Solid State Relays featuring new IP20 "touch safe" covers and LED input status indicators.
Evolving from Crydom's successful "D" and "H12" series Dual SSRs, the Evolution Duals offer an improved mechanical and thermal design providing higher capacity outputs and significantly increased power density. Screw termination suitable for rated load currents to 50 amps/ 660 VAC per channel is standard in either "SSR" or "Contactor" configurations. Each AC output channel features high power SCRs with high surge ratings and is available with either zero voltage or random turn on.
Four different input termination options (pin, locking connector, detachable barriers w/screws, and direct wire) are available with three different input voltage ratings including a wide range 4 to 32 VDC current regulated version. LED input status indicators for both channels are standard.
Evolution Dual SSRs are RoHS compliant, CE certified and have UL and cUL pending recognition. Optional clear IP20 touch safe covers are available allowing a clear view of the power lead terminations while providing touch safe operation. Crydom's new Evolution Duals are for use in a wide variety of applications including Heating, Lighting and Motion Control due to its industry standard footprint.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Ultrasonic sensors can be used in conditions where standard sensors cannot be used. They are not affected by colour, transparent or reflective surfaces or dusty atmospheres. The new F12P-EP is a special ultrasonic that has the option use a very narrow ultrasonic cone allowing the sensor to suppress any objects that interfere with the standard cone.
The sensing range is adjustable via a potentiometer on the top of the device and comes complete with bright LED’s and a M12 connection that can be rotated through 90 degrees. Multiple arrangements of up to 10 sensors can be achieved with mutual synchronization.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
© E. Preston (Electrical) Ltd 2024.
UK distributor of electrical and electronic components.