The new padlock device M800 complies with all requirements of the IEC and in combination with an additional padlock device mounted on the switch itself also with UL508A.
The new padlock device convince by its simple and robust design while featuring a compact unit.
Padlock device M800
The main features are:
• Single hole mounting with integrated door clutch.
• IP66/67 protection degree.
• Applicable for all cam switches of size S1 and S2 and KG41B, KG64B, KG80, KG100, KG105, KG125-KG317.
• Door interlock in the OFF-Position while a padlock is fitted and also in the ON-position.
• The door can be open in the non locked OFF-position, only.
• Override Function in the ON-position. The door clutch may be opened only if the witch is in the OFF-position. In special cases, however, authorized people have a requirement to open the door, even if the switch is in the ON-position.
• Accepted Misalignment: ± 3mm horizontally, ±5mm vertically.
• Maximum 3 padlocks with a minimum shackle diameter Ø 5 - 8 mm.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Based on the latest xStart DILM contactors, which have mechanical lives in excess of ten million operations and are fitted with durable RMQ Titan pushbuttons, Moeller Electric’s new enclosed motor starters combine exceptional reliability with compact dimensions and very competitive pricing.
In addition, because the starters are designed and built in the UK, they fully address the specific needs of UK users, and excellent availability is guaranteed
Standard products in the new Moeller Electric enclosed motor starter range include direct-on-line types with ratings from 4kW to 11kW, direct-on-line reversing types with ratings of 4kW and 5.5kW and star-delta types with ratings from 5.5kW to 15kW. The starters are available in 230V and 400V versions for use on 50Hz supplies.
The starters come complete with or without an isolator and are supplied fully wired, requiring only the addition of an overload relay – which mounts directly on the contactor – to be ready for immediate use. All models are offered in insulating or stainless steel enclosures with an IP65 ingress protection rating, or in sheet-steel enclosures which have an IP55 rating.
Moeller Electric's new enclosed motor starters are designed to provide long maintenance-free service lives. Customised versions to meet requirements which are not covered by the standard models are available on fast deliveries and at attractive prices.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
Crydom Solid State Relays (SSRs) are widely used in the heating industry. By specifying the Random Turn-on versions, Crydom SSR’s can be used as proportional controllers for varying power to resistance type heaters. Applied in a more basic way, when used in conjunction with “on-off” style temperature controllers, Crydom SSRs can be used as a power cycling switch without concern for contact arcing, burning, or the resultant reduction of life expectancy.
With the wide range of SSR types available, Crydom relays can be selected and used to control Quartz lamp, ceramic, infrared, CalRod, cartridge, immersion, strip, and band type heaters among many others. In addition, SSR’s can control fuel valves, blower motors, damper motors, and serve as the interface between thermostats and their primary equipment.
The Crydom MCTC Series of micro-controlled SSR/temperature controllers can be used as a stand alone temperature controller where a compact, low cost solution is required. The MCTC eliminates the need for a separate controller and SSR assemblies, by combining both into one standard size SSR package.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
ABB has launched a range of miniature circuit breakers (MCBs) aimed at OEMs, panelbuilders and the industrial sector. The System pro M compact® incorporates a number of new features designed to eliminate wiring connection errors.
A key feature is the positioning of the cabling terminal in front of the busbar connection terminal, making both terminals easier to access and see. By placing both terminal ports at the bottom of the MCB, connections can be made secure by using only one screw to fasten both the busbar connection and the electrical cabling into their respective terminals.
ABB has also introduced auxiliary contacts for the pro M compact® range, which can be added to the bottom of an MCB instead of the side. Saving up to 50% space in enclosures, this feature increases the number of auxiliary contacts which can be installed, expanding the number of remote monitoring options. Plug-in connectivity also makes the contacts simple to connect.
The pro M compact® MCBs also offer a reduced height compared to ABB’s previous range, saving around 2cm of space per MCB. This provides additional installation space for when space is at a premium.
ABB’s patented release system enables easy removal without the need for a screwdriver. Release connectors on the back of the devices allow them to be simply disconnected from the busbar after turning power off and disconnecting the wiring.
The pro M compact® range is suitable for use worldwide as the materials used to manufacture them exceed standards for both European regulations for RoHs and UL, the US directive for electrical components. The pro M compact® MCBs can be ordered ready for installation for both Europe and the US. A Europe-only version is also available.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
CA40 up to CA63 - robust and reliable!
Economic criteria are placing enormous pressure on you to optimize the reliability and safety without increasing size and weight of your product, but even decreasing it. The cam switches CA40 - CA63 satisfy the above described criteria.
Facts & Figures :
• IP 20 terminals, finger - prove tunnel - type terminals
• Robust and oversized switch terminals
• Captive terminals screws
• Compact design
• Higher switching capacity according to AC-23A
• One frame size covers current range from 40 - 63 Ampere
A large number of optional extras is available for this new switch type
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
© E. Preston (Electrical) Ltd 2024.
UK distributor of electrical and electronic components.