Contact Us
The latest company news and electrical products from E Preston Electrical

Browse By Category

Browse By Date

E. Preston Electrical

Company News

Schaffner - Latest Generation Passive Filters for Low Harmonic 690V Drives

July 6, 2011

Schaffner 225_31.jpg

Passive harmonic filters are an excellent tool for improving the compatibility of motor drives with the public power grid. Schaffner extends the popular ECOsine™ product range with filters for 690V systems, supporting a straightforward upgrade from standard motor drives to «low harmonic drives».

With the extension of the ECOsine™ product family, Schaffner, the international leader in the fields of electromagnetic compatibility and power quality, is raising the bar for harmonic mitigation solutions anew. The new passive 690V harmonic filters are an ideal solution for 3-phase equipment with 6-pulse front-end rectifiers, like e.g. variable speed drives or battery chargers.

Frequency inverters for energy efficiency and speed control of electric motors can, in combination with ECOsine™ filters, be utilized as low harmonic drives, causing minimum system perturbation. As a result of the significant reduction in total harmonic current distortion (THID) to typically 5%, ECOsine™ filters can uniquely guarantee compliance with the toughest requirements of IEEE-519 and other stringent international power quality standards. Drive and filter combined allow for unconditional use without the need for a costly power quality analysis in each case. The electrical infrastructure is reliably unburdened, transformers are utilized much more effectively, and the failure rate of neighboring electrical consumers is reduced.

The new ECOsine™ filters FN341xHV are rated for 690VAC/50Hz grids like those often used in chemical plants, in oil and gas exploration, or in heavy industry. The filters are available as a standard for diode rectifiers (FN3410HV) and upon request for thyristor rectifiers (FN3411HV). They come in common steps of power rating from 7.5 to 250kW. The compact filters are designed with IP20 rated enclosures, suitable for cabinet integration or for wall mounting in electrical utility rooms.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

For more information
We are happy to help!

ECOsine™ Active – The Digital Schaffner Solution for Excellent Power Quality

July 4, 2011

Schaffner 225_31.jpg

Barely one year after the introduction of ECOsine™ passive harmonic filters, Schaffner presents the digital solution for the efficient reduction of system perturbations: ECOsine™ Active. Latest generation electronics enable an intelligent and adaptive compensation of harmonic currents with a response time of less than 300 microseconds.

With the introduction of ECOsine™ Active, Schaffner, the international leader in the fields of electromagnetic compatibility and power quality, is taking its offering of harmonics mitigation products to the next level. ECOsine™ Active continuously measures and analyzes disturbances in the power network and provides an exactly opposite compensation current. In doing so, the filter actively adapts to changing network topologies and responds in less than half a millisecond.

The use of ECOsine™ Active supports the owner in complying with the stringent international harmonics standards as well as with local utility codes. At the same time the electrical infrastructure is unburdened, a potential overheating of transformers, motors, cables etc. is prevented, and the pre-mature wear of electrical equipment is reduced. The improved Power Quality minimizes the risk of downtimes and process interruptions, saves energy and money.

Besides the global or selective mitigation of harmonic currents up to the 50th order ECOsine™ Active is able to perform power factor correction in a targeted manner. In highly dynamic processes like they are found in welding robots, for example, ECOsine™ Active provides the required reactive power within microseconds, faster than traditional automatic cap banks.

ECOsine™ Active is easy to install and intuitive to operate. The compact package of ECOsine™ Active makes its use possible even when space is at a premium. The 50 and 100 Amp filters in IP20 design are ideal for panel integration, so they can, for example, be installed right by the non-linear load. The IP54 rating of the 300A unit provides protection against dust and environmental influences, perfect for harsh industrial applications.

ECOsine™ Active is available in 3-phase/3-wire as well as 3-phase/4-wire configuration for 480V and 400V grids respectively and with rated compensation currents of 30 to 300A. All 3-wire filters are UL listed and therefore ready for the North American market. Building technology and HVAC installations, heavy industry, data and banking centers, UPSs, water/wastewater treatment facilities, or welding equipment can equally benefit from the many advantages of ECOsine™ Active.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

For more information
We are happy to help!

ECOsine™ Schaffner Power Quality Filters Calm Down Harmonic Waves

May 25, 2011

Schaffner 225_31.jpg

The introduction of Schaffner ECOsine™ filters concludes the era of bulky passive harmonic mitigation products. Superior filter topology and advanced temperature management result in high performance filters in a surprisingly compact, lightweight, and contemporary package.

With the introduction of ECOsine™, Schaffner, the international leader in the fields of electromagnetic compatibility and power quality, is raising the bar for harmonic mitigation products. The new load-applied passive harmonic filters represent the ideal solution for three-phase power electronics with 6-pulse rectifier front ends, such as AC and DC motor drives.
.
As a result of the significant reduction in total harmonic current distortion (THID) to <5%, ECOsine™ filters can uniquely guarantee compliance with the toughest requirements of IEEE 519 and other stringent international power quality standards. Rectifier peak and RMS input current are reduced and a pure sine wave is drawn from the grid. The reduction in current consumption for the same power level saves precious energy and helps to make better use of existing electric system capacity. For new installations, the use of ECOsine™ filters even allows electric conductors, fuses, and breakers to be downsized, or enables a greater number of drives to be powered by a given size of distribution transformer.
.
ECOsine™ harmonic filters are available in two ranges: one for 50Hz grids (FN 3410 series) and the other for 60Hz systems (FN 3412 series). They can easily be selected on the basis of the actual input power demand of an individual load or a group of loads. Because of their compact package, they can be installed right inside the electrical cabinet next to the drive. A simple plug-and-play concept allows for quick installation, wiring, and commissioning, without the need for system analysis or the involvement of highly trained specialists.
A standard safety feature continuously monitors filter temperature, controls the internal fans, and provides an NC/C contact for the seamless integration into a machine or system control unit.
.
ECOsine™ FN 3410 filters are designed for 380-500V, 50Hz grids and are available for power ratings from 4 to 160kW. FN 3412 filters are suitable for 440-480V, 60Hz grids with standard ratings ranging from 5 to 250HP. All filters are UL-approved, CE-marked, and RoHS-compliant. As a custom design specialist, Schaffner can always provide solutions beyond standard filter specifications, for higher power ratings, different grid types, or to meet local utility requirements.
.
For more information
We are happy to help!
For more information
We are happy to help!

FMBB NEO – Schurter Presents the New Compact High Grade EMI-Filter, the New FMBB NEO Series for One Phase Systems

December 17, 2010

Schurter Logo1.jpg

Schurter expands its family of EMI-Line Filters for one phase systems with a new and compact high end filter series, called the FMBB NEO. Three variations of 2-stage filter designs allow a specific selection of FMBB NEO filter products for efficient EMI solutions.

The new FMBB NEO Filter series consists of 3 different compact 2-stage filter designs. The 3 filter designs (Design C, Design D and Design F) are characterised by a high symmetrical and asymmetrical attenuation. The FMBB NEO filter Design C attenuates potentially strong conducted interferences. Design D is laid-out for the attenuation of high frequency interferences, whereas the Design F is designed more for low frequency noise attenuation. All designs come up with a high insertion loss performance. The FMBB NEO one phase filter is dimensioned as a 250 VAC filter at a rated current of 1-36 A according IEC and 125/250 VAC, 1-30 A according UL/CSA. The connection to the filter is made by quick connect terminals or with bolts and nuts, style M4. Optional flexible wire leads are available on request.

The compact NEO designed EMI-Filter is intended for use in industrial applications such as frequency converters, stepper motors, UPS-systems, current converters. On request medical versions with leakage currents of < 80μA (M80) respectively < 5μA (M5) are available. The series is ENEC and cURus approved and is qualified for use in equipment according IEC/EN standard 60950.

Technical Features:
- One phase EMI-Line Filter according IEC60939 and UL1283 available in 3 designs (design C/D/F)
- Current ratings: 1-36 A at 250 VAC (ENEC) or 1-30 A at 125/250 VAC (UL/CSA)
- Quick connect terminals / bolt and nut M4 terminals / flexible wire leads optional
- Standard or medical version M5 or M80
- Screw-on chassis mounting from top

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

For more information
We are happy to help!

Finder 7P Series Adds Additional Surge Protection Devices Safeguard Photovoltaics

December 16, 2010

Finder.jpg

Finder has introduced surge protection devices (SPD) designed specifically for photovoltaic (PV) panel installations.  Additions to its popular 7P Series of SPDs, three new Type 2 surge arresters will protect PV systems from the effects of lightning strike and electrical switching transients.  The products are already supporting the company’s own PV panels at its primary manufacturing plant.

Featuring encapsulated spark gap and/or replaceable varistor modules, the three devices protect the more vulnerable DC side of commonly used earth free and mid point earthed PV systems.  The range includes: the 7P.26.9.420, providing 2 varistors and 1 spark gap for 420V DC systems; the 7P.23.9.700, providing 3 varistors for 700V DC systems and the 7P.23.9.000, providing 3 varistors for 1000V DC systems.

Each device integrates both a visual indicator and a signalling contact to warn when a varistor module needs replacing.  Connection to the signalling contact is via a convenient plug-in terminal block.  The SPDs comply with EN 61643-11 standard and can be 35mm rail (EN 60715) mounted.

Finder’s introduction of a range of SPDs tailored to the needs of PV installations comes at a time when UK government Feed-In Tariffs (FITs) appear to have stimulated a step increase in interest in PV system in the country.  The UK is now the fastest growing market for PV solar energy installations, estimated to produce 96MW of electricity in 2010 compared with 6MW in 2009.

At the same time, a prospective revision of the UK wiring regulations, placing far more emphasis on the provision of protection from electrical surges, has meant there is a resurgence of interest in associated products, in particular varistor and spark gap type SPDs.

PV panels at Finder’s prime manufacturing site in Almese near Turin in North West Italy have been producing an output power of 55kW since early 2009, equating to 61,000 kWh/year.  So pleased with the performance, the company has this month commissioned a further 60kW of PV panels, which of course will be protected by the new 7P Series surge arresters.

Constructed using multicrystalline silicon PV modules, Finder’s initial PV system is calculated to have reduced CO2 emissions by about 37 tons/year, achieving annual cost savings of around 11 TOE (tonnes of oil equivalent).

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

For more information
We are happy to help!

Schurter Series 5003 Expands its ECO Designed DC Filter Power Entry Module Family to Include a Version with Flexible Wire Leads and a Version for PCB Mounting

December 8, 2010

  Schurter Logo1.jpg

Schurter extends its ECO filtered power entry module for DC applications, series 5003, with a newly added PCB mount version, and version with flexible wires to provide easy installation, cost savings and maximum performance in a lightweight and environmentally friendy compact package. Applications are in data critial environment such as IT, telecom and data encription but also in DC supplied industry automation.

The 5003 features a standard DC connector, offered in two different connector styles. The connector is encased with a 1-stage filter for currents up to 15 A at 125 VDC. The unit mounts to the equipment enclosure with a broad metal flange, thus providing a large contact area for optimal shielding and filter efficiency. The PCB mounting style version is available with optional snap feet to safely fasten the 5003 on the printed circuit board. The flexible wire leads allow an easy, fast and cost saving installation. Screw-on, snap-in and rivet mounting options are offered. The rear mount type with pre-threaded holes, as well as the snap-in, are designed specifically to reduce assembly time and save labor costs.

The series is ENEC and cURus approved and complies with IEC/EN 60950, standard for office and IT equipment. Applications include telecom and IT infrastructure equipment, data encryption machines but any other DC supplied equipment in industry automation.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

For more information
We are happy to help!

Schurter Expands its Series 5120 ECO Designed Filtered IEC Inlet Family

October 29, 2010

Schurter Logo1.jpg

Schurter's IEC C14 inlet with EMI filter, series 5120 ECO design, meets the increasing demands of IT, medical and industrial appliances. The existing panel mount version is now available with flexible wire leads in addition to quick connect and solder terminals. A PCB mount version is also newly introduced. The new configurations provide easy installation, cost savings and maximum performance in a lightweight and environmentally friendly compact package.

The series combines an IEC C14 or C18 inlet with line filter in various mounting styles. With the addition of the flexible wire and PCB versions SCHURTER has again expanded its range of filtered power entry modules for low and high current applications. The EMI filter is dimensioned as a 1-stage filter for rated currents up to 15 A with a leakage current standard <0.5 mA and medical <5 μA. The positive electrical contact of the broad metal flange to the chassis ensures optimal filtering and shielding.

Mounting options include screw-on, rivet or snap-in mounting. The snap-in mounting style as well as the screw-on version from rear side with its pre-formed threaded holes reduces labor costs. The PCB mount version is available with optional snap feet to safely fasten the unit on the printed circuit board. The flexible wire leads provides pre-assembly for easy and fast installation.

.

The 5120 is designed for use in IT, medical and industrial applications. The series is ENEC and cURus approved and complies with IEC/EN standards for office and medical equipment, 60950 and 60601-1 respectively.

Technical Features:
- Appliance inlet IEC C14 or C18 acc. to 60320 with EMI filter
- Current ratings: up to 10 A at 250 VAC (ENEC/UL/CSA) or 15 A at 125/250 VAC (UL/CSA)
- Screw-on or rivet mounting from front or rear side / Snap-in mounting
- PCB mounting / flexible wire connection / Quick connect terminals / Solder terminals
- Standard or medical version
- Version for enhanced withstand voltage available (X1, Y1)

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

For more information
We are happy to help!

New Schurter DC Filter FMER SOL

August 26, 2010

Schurter Logo1.jpg

Schurter presents its new standard DC filter series FMER SOL suited for use on the DC side of the inverter in photovoltaic systems and other DC systems.

Modern solar inverters, that use MPP (maximum power point) trackers, generate disturbances into both the grid’s AC power line, as well as the DC side of the solar module. An AC filter is normally used on the grid’s AC power line, but the noise generated on the DC side tends to be overlooked.  EMC standards EN 61000-6-3 and EN55014-1, however, also put limits on the noise generated from lines not connected to the grid, such as for example the line to the solar panels. Meeting these limits can be achieved by using a DC filter on the DC side of the inverter.

Large solar inverters installed in electrical installations will generally require a cooling system. Components which provide high temperature resistance simplify the system and reduce the energy needed to cool. The FMER SOL filters are designed for rated currents from 25A to 1500A at 55°C ambient temperature, and voltages up to 1200VDC.  The filters are cURus and ENEC approved up to 75°C ambient temperature, with corresponding reduced rated currents.

The FMER SOL DC filters are designed with screw clamps for types up to 150A and copper bars for types upwards of 250A. Other types of connections, such as wires or copper bars <250A, are available on request.  Small adjustments can also be made to the electrical circuit or to the filter housing on request.

.

.

Technical Data:
- Rated currents: 25A to 1500A at 55°C
- Operating voltage: up to 1200VDC
- Temperature range: -40°C to +100°C

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

For more information
We are happy to help!

Schurter, Series 5008, Expands It's Family of Power Entry Modules With A New & Compact Filtered Appliance Inlet According IEC, Style C8, Protection Class II.

August 19, 2010

Schurter Logo1.jpg

Schurter series 5008 inlet, according to IEC C8, with integrated EMI filter meets the increasing demands of IT, medical and consumer appliances for cost reduction and downsizing. The 5008 inlet provides a maximum performance and cost savings in a lightweight and environmental friendly package. The new design is now available with options for screw and snap-in mounting version.

The new 5008 series combines an IEC C8 inlet with a line filter for low power applications.  The EMI filter is dimensioned as a 1-stage filter for rated currents up to 2.5 A according IEC respectively 6 A according UL and available as standard or medical version. The integrated EMC filtering mounts directly at the point of power entry, ensuring an optimal effect on the electromacnetic compatibility performance of the unit.

Mounting options include screw-on or snap-in mounting. The snap-in mounting technique reduces the assembly costs considerably for reduced handling and ease of assembly. The connection is made with quick-connect terminals. Optional solder terminals are also available.

The unit is designed for use in IT, medical and home applications appliances. The 5008 is the optimal solution, combining uncompromised features and performance with compactness of design to meet the increasing demands in cost efficiencies and ecological concerns. The series is ENEC and cURus approved and complies with IEC/EN standards for office and medical equipment, 60950 and 60601-1 respectively.

Technical Features:
* Appliance inlet IEC C8 acc. to 60320 with EMI filter
* Current ratings: up to 2.5A at 250 VAC (ENEC/UL/CSA) or  A at 125/250 VAC (UL/CSA)
* Screw-on mounting and snap-in mounting
* Standard and medical version

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

For more information
We are happy to help!
1 7 8 9 11

Featured Products

Manufacturers

Privacy Policy
Website built and optimised by Miltec Digital

Get In Touch

Fill in your details to request a call from one of our sales representatives.
E Preston Contact Form
chevron-leftchevron-right linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram