Cynergy3 Components have recently launched a new variant of their high voltage reed relays - these having high insulation resistance of 1x10E14 Ohms. Available in PCB mount format with either PCB connections or flying leads, there are a range of 5, 12 or 24Vdc coil versions, with either tungsten or rhodium contacts.

* 10kV or 15kV Isolation
* Low Contact Resistance
* PCB or Flying Leads Connections
* Ideal for sensitive test and measurement circuits which require low leakage current losses

Very high isolation voltages - up to 15kV - are achieved through the use of high vacuum reed switches with either rhodium or tungsten contacts which make these relays suitable for high reliability applications, such as cardiac defibrillators, test equipment and high voltage power supplies. The rhodium contact relays have low contact resistance, while the tungsten contact relays can switch higher voltages.

Typical applications for these DH-R Series relays include cardiac defibrillators, test equipment, high voltage power supplies and other high reliability equipment.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL venting elements are the ideal accessory for preventing the build-up of condensation in vital electrical enclosures and improving their protection against water ingress. The breathable membrane is installed in applications where temperatures may vary and allows the internal air pressures to equalise without drawing in any moisture from the air.

• Easy to install on any standard enclosure design
• Available with IP66, IP67 and IP69K protection
• M12 thread in black or grey colours
• Typical flow rate 90-130ml/min/cm2 at Ap=0.01 bar

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Bulgin – an Elektron Technology connectivity brand – is proud to announce the launch of the latest addition to its extensive range of environmentally-sealed circular connectors – the Buccaneer® 7000 Series for mains power applications. Designed to offer rapid and secure mains power connectivity in harsh environments, the Buccaneer 7000 is remarkably compact for its 25A and 600V rating, and has been developed to provide excellent sealing characteristics to IP67, IP68 and IP69K standards.

The all new Buccaneer 7000 Series features the Buccaneer range’s tried and tested one-piece body construction, and has a unique twist locking system with positive feedback, providing quick and convenient, ‘fit and forget’ connectivity in less than quarter of a turn, without the need for technical expertise or specialist tools. Available in 2, 3, 6, 10 and 32 pole options, with a choice of fully interchangeable nickel plated, cast zinc alloy or UV-resistant, UL94-V0 flammability-rated plastic bodies, the Buccaneer 7000 Series will offer engineers and designers the greatest possible flexibility in system design.

Stuart Hutchings, Marketing Manager for Bulgin, commented: “The Buccaneer 7000 Series is designed for use across a broad range of demanding applications, from outdoor broadcasting and lighting to industrial automation and marine installations. These innovative connectors will provide a compact, cost­effective and, most importantly, easy-to-use solution that offers complete environmental protection.”

German Casillas, Head of Connectivity at Elektron Technology, added: “The new Buccaneer 7000 series is another example of Elektron Technology’s pioneering approach, combining many years of experience with emerging technologies to create comprehensive products that meet the ever­changing needs of the marketplace.”

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Utilising our years of technical knowledge and our background in lamp manufacturing, we at CML proudly introduce our new range of medical equipment replacement lamps.  Our extensive product line offers lamps for Endoscopy, operating theatre, microscope, and projector lamps to name just a few of the medical areas that we are able to supply replacements for.

In addition to our own CML brand of replacement medical lamps we are now in a position to be able to offer you many original OEM medical lamps from major equipment manufacturers including Ushio, Osram, Excelitas, Heine and Welch Allyn at very competitive pricing, thus saving you the end user money.

With over 180 lamp items currently available in this new range of lamps, many of which are held in stock at our centrally located modern UK warehouse facility, we are able to offer a same day dispatch for both domestic and European export orders if required.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The new MSM LA CS ON/OFF stainless steel pushbutton switch from SCHURTER is equipped with an actuator made of durable ceramic. The same ceramic is already being used to manufacture the previ-ously introduced MSM CS momentary action switches. The material resists scratches and abrasive chemicals as well as impact; it can also be labeled with highly durable legends.

The non-illuminated versions of the MSM LA CS and MSM CS switches are offered with a white actuator surface. Standard or customer-specific black legends are applied directly into the ceramic material. Due to the base material and the labeling process, the inscription is scratch-proof and stands up to common cleaning agents. The illuminated design provides a uniform glow across the entire surface in the desired illumination color (red, green, blue, white, orange).

The MSM LA CS pushbutton switch is available with mounting diameters of 19 and 22 mm. It is suited for use in a temperature range of -20 °C to +85 °C. Equipped with blade terminals, the MSM LA CS can be wired up very quickly: the pre-assembled cable set is plugged into the quick-connect terminals of the microswitch, which is then snapped into the switch housing.

The sturdy stainless steel housing and the actuator made of scratch-proof ceramic make the MSM LA CS latching action and MSM CS momentary action switches especially well suited for use in equipment operating in harsh environments, or applications that require protection against vandalism. These in-clude, for instance, vending machines, ticket machines, equipment in restaurant operations, public facili-ties, sanitary facilities as well as applications in hypoallergenic environments such as the medical sector.

Technical Information / Approvals
- MSM LA CS pushbutton switch: switching voltage 250 VAC, switching current 12 A, 1 or 2 pole
- Actuator face made of scratch-proof ceramic, backlit along the entire face
- Standard LED illumination colors: red, green, blue, white, orange
- Operating temperature: -20 °C to +85 °C
- Protection rating IP64, protection class IK07
- Microswitch with UL, CSA and ENEC approval
- Packaging unit: 10 pieces

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

For simple ON/OFF cycling with extreme time parameters, a wide universal supply voltage capability and clear and easy settings, Finder’s new 88.92 timer with Asymmetric Flasher (Recycling) provides an attractive solution that’s particularly suitable for operator adjustment from an equipment’s front panel.

The 88.92 offers a wide option of time ranges from times as short as 50 milliseconds and as long as 300 hours—a ratio of up to 800,000:1 should you need it—ideal for driving warning devices such as sirens or flashing lamps, or for mixing or dosing liquids or other materials.

It’s attractive for front of panel mounting and adjustment, but equally appealing for internal mounting where visibility is restricted or otherwise difficult.

The product is available in a version starting with the OFF state, and a version starting with the ON state. The main features include:
•  12 .... 240 VAC/DC power supply
•  2 changeover contacts rated 8A 250V AC1
•  Adjustable time delay: 0.05 s .... 300 h
•  UL approval

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter now equips its FPG7 shock-safe SMD fuseholder with two stabilizing posts. The added posts extend from the existing front standoffs, providing increased stability during board assembly, and when replacing the fuse. The FPG7 is also the only shock-safe SMD fuseholder on the market for 5x20 mm cartridge fuses.

The trend towards SMD applications continues unabated. In response, Schurter already offers a large selection of SMD components such as fuses and fuseholders in its product range. As part of the Schurter range, the FPG7offers the only shock-safe SMD fuseholder on the market. The newly added stabilizing posts improve the design, by optimizing the stability of the fuseholder during the mounting and soldering process of the PCB. Further, the stabilizing posts help absorb the axial forces that arise when the fuse is being replaced.

With rated power acceptance of up to 2.5 W at 10 A / 250 VAC according to IEC, combined with rated current of up to 16 A at 400 VAC according to UL/CSA, the FPG7 is the ideal solution for applications requiring primary protection. Overall, the FPG7 is well suited for applications where the following requirements must be met: SMD assembly, compact design, primary protection, and external access to fuses. Specific applications in this regard include industrial and medical equipment as well as household appliances. Depending on the application, the customer can select between two fuse cap options, either a slotted version for screw driver access or fingergrip version.

The FPG7 is manufactured with RoHS-conforming materials that are temperature resistant and designed for reflow soldering processes. These materials today meet the requirements for equipment in unattended operation according to IEC 60335-1 and the intensified glow-wire test requirements according to IEC 60695-2. Furthermore, the FPG7 achieves a protection class of IP40 and a shock-safe category of PC2. The blister tape packaging option enables efficient manufacturing using automatic placement machines. All versions of the FPG7 have VDE and cURus approvals.

Technical data:
- Rated voltages up to 400 VAC
- Rated currents up to 16 A
- Rated power consumption according to IEC up to 2.5 W at 10 A
- Protection class IP40
- Shock-safe category PC2
- VDE and cURus approvals

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL now offers the DE01 range of pre-installed control stations which combine tough IP67 enclosures with hard wearing push button and selector switches reducing time spent on-site. Installation is further aided thanks to unique, snap-on brackets for easy wall, chassis and DIN mounting.

*  Variety of sizes and depths to accommodate different application requirements
*  Thick walls constructed from robust ABS material
*  Up to IP67 protection depending on switch options
*  Snap-on bracket mounting available for DIN rail or chassis / wall mounting
*  Selection of push button and selector switch types and combinations are available
*  Suitable for indoor and outdoor use in domestic, commercial and industrial applications
*  All products comply fully with ROHS and REACH standards

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Cynergy3 Components has introduced the D200 Series high voltage reed relays which combine a high power 200W switching capacity with isolation of 7kV across the contacts.

The D200 relays come in the same package and pin-out as the popular D Series. The switching performance is achieved through the use of high vacuum reed switches with tungsten contacts. Typical D200 Series applications include test equipment, high voltage power supplies, medical equipment, or any application requiring increased safety margins on the switching power ratings.

D200 Series relays come with Normally-Open (NO) contacts. Models are available with 5V, 12V and 24V coil operation. The maximum switching voltage is 2.5kV. The contacts are capable of switching 3Adc, or carrying a maximum current of 5Adc.

Cynergy3 Components has been manufacturing high voltage reed switches and reed relays for over 40 years. All relays are assembled in the state-of-the-art facility located in Wimborne UK. Cynergy3 Components also manufactures a wide range of sensor products including Liquid Level, Liquid Flow and Pressure Sensors. All products are stocked and available through distributors worldwide.

Simon Dear, Sales & Marketing Manager at Cynergy3 Components comments: “The D Series relay has long been the favourite choice for engineers with demanding high voltage applications. The new D200 Series provides engineers with a solution for critical applications where increased power handling capability is a prime concern”.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

With the ESO 10.3x38, Schurter introduces a multi-functional fuse cover for use on printed circuit boards. The ESO 10.3x38 can be used simultaneously as an inserter, extractor and cover for fuses. Designed for use with Schurter’s CSO fuse clips, and the ASO 10.3x38 fuse, the combination provides touch-safe circuit protection up to 1500 VDC.

The demand for compact components for use on circuit boards is constantly growing, including in solar applications. Schurter meets these requirements with its patented ESO 10.3x38. With the ESO 10.3x38, fuses with the 10.3x38 mm format can be simply and securely attached to clips. Upon inserting the ESO 10.3x38 with captive fuse into the fuse clips, the installation provides a touch-safe cover according to IP20 specifications. If the fuse is triggered, then the ESO 10.3x38 can also be used as a fuse removal aid. Additional tools are not required. If the ESO 10.3x38 is used together with Schurter’s CSO fuse clips, and the Schurter’s ASO 10.3x38 fuse, then these form a fully compatible, safe and cost-effective combination.

In addition to numerous applications in the energy and industrial sectors, the ESO 10.3x38 is particularly suitable for protecting solar applications with rated currents of up to 32 A or rated voltages of up to 1500 VAC/VDC. Specific applications include solar inverters, string fuse boxes and battery charge controllers based on printed circuit boards. Standard terminal markings can also be optionally attached for simple identification of the fuse. When combined with the CSO fuse clip from Schurter, the ESO 10.3x38 has cURus certification.

Features and benefits:
- Compatibility with Schurter’s CSO clip and ASO 10.3x38 fuse
- All-in-one solution: insert, extract and cover fuses on PCBs
- High electrical ratings of up to 32 A and 1500 VAC/DC
- Patented, compact and cost-effective design
- Touch-proof cover according to IP20
- No additional tools required

Applications:
- Energy and industrial applications
- PV applications
- Solar inverters
- String fuse boxes
- Battery charge controllers
- DC applications

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/