The Kwik Fix cable gland from Hylec-APL has been designed to offer installers speedy installation for applications where access to the interior of a bulkhead or enclosure is restricted. The gland, which is especially suited to switch cabinets and cooling and heating systems, can be used to form a quick, easy IP68 cable transit.

Easy Installation Process
*  No separate locknut required
*  Assembly from one side only
*  Available in M16/20/25
*  Polyamide PA6 V2 Black and Grey
*  IP68 protection
*  Applies to Hylec cable gland series K341

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The 39 Series MasterINTERFACE, next-generation interface has extended its range with the addition of models featuring “push-in” terminals – the innovative connector system which allows the direct entry of solid wires without the need to open the clamp.

As with the screw terminal models, the extended range consists of 5 types, all available with electromechanical relays (1 changeover contact 6 A) or with solid state relays (1 NO 2A at 24 V DC or 230 V AC):

•    Master BASIC (code 39.01 relay, 39.00 SSR)
•    Master PLUS (code 39.61 relay, 39.60 SSR)
•    Master INPUT (code 39.71 relay, 39.70 SSR)
•    Master OUTPUT (code 39.51 relay, 39.50 SSR)
•    Master TIMER (code 39.91 relay, 39.90 SSR)

Each type will be available with the same input voltage versions as the current models with screw terminals, although both 
screw and push-in types will now offer the following additional versions:

MasterBASIC – with AC 110 ... 125V AC/DC (using new sockets: 93.61.0.125 and 93.60.0.125)
MasterINPUT – compatible with the sensors with current less than 100 mA (using new sockets 93.64.7.024 and 93.67.7.024).

All 39 Series accessories (ie. the output fuse module 093.63, the 093.16 jumper links in Blue, Red and Black, the 093.60 separator and the 093.68.14.1 “MasterADAPTER”) can be used with the new sockets.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL has added two IP68 electrical connectors to its waterproof range which have diameters that are less than that of a one pound coin. The inline connectors both use cable gland technology to form a completely weatherproof seal without the need for silicone gel. The connectors are designed so that the terminals form part of the outer casing making the overall diameter of the connectors just 23mm.

* Mini-TeeTube and mini-TeePlug have an innovative design which incorporates the wire terminals as part of the external housing.
* Housing ends features a dome topped cable gland and co-moulded sealing rings ensuring a high IP rating when assembly is complete.
* Both connectors can be ordered in 2, 3 or 4 pole options.
* Quick installation, wire piercing screw terminal blocks are also available which make it possible to secure the connection to IP68 standards in less than a minute.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter expands its broad range of cord retaining systems to include a new clip retaining device for IEC C8 inlets and mating cord sets.    The new clip device is a further addition to the already successful broad range of Schurter cord retaining systems for IEC C14 and C20 inlets, comprised of V-Lock latching cord sets wire-bails and clamps.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter is pleased to announce, that its compact KEA series power entry module, with 1- or 2-pole fuseholder, now mates with V-Lock cord sets. The KEA’s new V-Lock compatible feature prevents unintended disconnection of the power from the equipment.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL has launched a new range of quick installation connectors which allow users to make connection by simply pushing the wire into the opening. They are ideal for applications that require the common connection of multiple conductors such as lighting ring-main cabling connections in ceiling voids.

* Plated brass inserts clamp the wire in place once inserted to form the connection.
* Transparent side plates facilitate a view of the internal connections.
* Units are colour coded per size (2 – 8 conductors).
* Dovetail slots make stacking easy for neat wiring.
* 10mm high, 18mm wide and 10mm-30mm long depending on entry points.
* Accommodate wire dimensions between 0.5mm and 2.5mm.
* Fully comply to IEC/EN 60998-1 and 60998-2-2 standards.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

When it comes to household appliances used in unattended operation, the provisions of standard IEC 60335-1 have in the past few years placed higher requirements regarding glow-wire ignition temperature (GWIT). These more stringent requirements thus also apply to installed components such as power sockets, fuse holders and connectors. For this reason, all components carrying current must meet the requirements of glow-wire tests as specified in IEC 60695-2-12 and -13.

As a leading producer of fuse holders and power sockets, Schurter manufacturers a large number of products made of plastic materials with high glow-wire ratings. These are above all shock-safe fuse holders in the successful FPG series, which are available in a wide range of shapes and sizes as well as fuse blocks for assembly on circuit boards. Power connectors rated for 10 A and 16 A, including with a wide range of assembly types and various terminals, also meet these stricter requirements.

Schurter thus fulfills and exceeds the strict guidelines concerning fire prevention for electrical devices that are operated in households unattended. Which appliances are considered to fall under the «unattended» category and thus need components of this glow-wire category is defined in standard IEC 60335-2. Examples of such appliance types are dishwashers, coffee machines, washing machines and kitchen stoves.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter now offers two appliance inlets in splash-water proofed versions. The appliance inlet 6100-3 with a sealing kit has a protection degree of IP 54, both into the equipment and to the cord connector. The 5707 power entry module with line filter offers IP 65 protection into the equipment as a standard feature. With the optional sealing kit, the coupling to the cable connector is additionally protected to IP 54.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

External display advertising is an effective means of communicating a message to a wide and diverse audience. Stock Displays is one of the UK’s leading manufacturers of high-spec internal and external display products for use in public areas. With several prestigious clients Stock Displays needed to be sure that its products can withstand daily use and continue to display advertising messages in wind, rain and snow.

Fortunately Hylec-APL was able to offer a solution which met all of the company’s needs.

*  All-new Mini-TEETUBE series TH391 is the latest addition to the innovative TEE family of weatherproof products which offer quick and easy installation with IP68 ingress protection.

*  TH391 is one of the smallest IP68 electrical connectors on the market which doesn’t depend on silicone gel to prevent moisture ingress.

*  The connector uses a unique design which sees the terminal block forming part of the external housing to achieve its tiny footprint.

* IP68 seal is then formed using the dome topped cable glands which form the entry points of the connector.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Bulgin – an Elektron Technology connectivity brand – has launched 4-, 6- and 8-pole versions of its popular PX0777 environmentally-sealed in-line cable joiner, offering cost-effective water- and dust-proofing for a wide range of applications.

 The original 3-pole version of the PX0777 has been part of the Bulgin Buccaneer range of environmentally sealed connectors for over 15 years, taking advantage of the Company’s tried and tested technology to provide convenient IP68 rated connectivity for indoor and outdoor use. The recently released 4-, 6- and 8-pole cable joiners extends this robust environmental protection to a wider range of applications, offering rapid connection of multi­core cables.

The new variants of the PX0777 uses a specially designed circular terminal block – rated at 10 A, 250 V per pole – allowing safe, secure connection of up to eight 1.5 mm2 cores using the same compact moulded plastic body as the 3-pole version. Available with a variety of sealing glands to suit 3.5 to 9 mm cables, the PX0777 can be quickly and conveniently assembled without the need for special tools, making it ideally suited to on-site installation of mains power or signal connections, either planned or unplanned.

Stuart Hutchings, Marketing Manager for Bulgin, commented: “The new PX0777 is designed for use across a broad range of demanding applications in harsh environments. Engineers often don’t know the exact length of cable needed until they get onto a site, so a ‘fit and forget’ solution such as the PX0777 is perfect for these situations, providing a reliable, long-term sealed connection in minutes.”

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/