Hylec-APL venting elements are the ideal accessory for preventing the build-up of condensation in vital electrical enclosures and improving their protection against water ingress. The breathable membrane is installed in applications where temperatures may vary and allows the internal air pressures to equalise without drawing in any moisture from the air.

• Easy to install on any standard enclosure design
• Available with IP66, IP67 and IP69K protection
• M12 thread in black or grey colours
• Typical flow rate 90-130ml/min/cm2 at Ap=0.01 bar

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL now offers the DE01 range of pre-installed control stations which combine tough IP67 enclosures with hard wearing push button and selector switches reducing time spent on-site. Installation is further aided thanks to unique, snap-on brackets for easy wall, chassis and DIN mounting.

*  Variety of sizes and depths to accommodate different application requirements
*  Thick walls constructed from robust ABS material
*  Up to IP67 protection depending on switch options
*  Snap-on bracket mounting available for DIN rail or chassis / wall mounting
*  Selection of push button and selector switch types and combinations are available
*  Suitable for indoor and outdoor use in domestic, commercial and industrial applications
*  All products comply fully with ROHS and REACH standards

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The Hylec-APL range of thick walled, ABS door enclosures offers end-users a rugged IP65 electrical/electronic equipment housing solution for outdoor applications, including marine environments. The enclosures are constructed from a flame retardant material and include a galvanised steel back plate. External brackets are included for quick mounting to walls and surfaces without compromising the enclosures ingress protection levels.

*  Ingress protection rating IP65 and impact resistance rating IK08
*  Manufactured from UL approved Flame retardant ABS-HB
*  Range of 8 different sizes
*  Opaque or transparent doors available
*  Door locks and keys as standard
*  Unique galvanised steel back mounting plate for easy equipment installation into enclosure

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

The Kwik Fix cable gland from Hylec-APL has been designed to offer installers speedy installation for applications where access to the interior of a bulkhead or enclosure is restricted. The gland, which is especially suited to switch cabinets and cooling and heating systems, can be used to form a quick, easy IP68 cable transit.

Easy Installation Process
*  No separate locknut required
*  Assembly from one side only
*  Available in M16/20/25
*  Polyamide PA6 V2 Black and Grey
*  IP68 protection
*  Applies to Hylec cable gland series K341

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL offers a range of pre-installed control stations which combine tough IP67 enclosures with hard wearing push button and selector switches; helping installers to reduce time spent on-site. Installation is further aided thanks to unique, snap-on brackets for easy wall, chassis and DIN mounting.

*  Features a unique snap-on bracket for wall or DIN mounting.
*  Patented range of control stations available exclusively from Hylec-APL.
*  Up to IP67 protection depending on product.
*  5mm wall thickness provides enough strength to replace many metal enclosures.
*  Available with a huge range of buttons and switches; many variations available pre-assembled.
*  Delivered with two M20 threaded cable gland entries.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL has added two IP68 electrical connectors to its waterproof range which have diameters that are less than that of a one pound coin. The inline connectors both use cable gland technology to form a completely weatherproof seal without the need for silicone gel. The connectors are designed so that the terminals form part of the outer casing making the overall diameter of the connectors just 23mm.

* Mini-TeeTube and mini-TeePlug have an innovative design which incorporates the wire terminals as part of the external housing.
* Housing ends features a dome topped cable gland and co-moulded sealing rings ensuring a high IP rating when assembly is complete.
* Both connectors can be ordered in 2, 3 or 4 pole options.
* Quick installation, wire piercing screw terminal blocks are also available which make it possible to secure the connection to IP68 standards in less than a minute.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL has launched a new range of quick installation connectors which allow users to make connection by simply pushing the wire into the opening. They are ideal for applications that require the common connection of multiple conductors such as lighting ring-main cabling connections in ceiling voids.

* Plated brass inserts clamp the wire in place once inserted to form the connection.
* Transparent side plates facilitate a view of the internal connections.
* Units are colour coded per size (2 – 8 conductors).
* Dovetail slots make stacking easy for neat wiring.
* 10mm high, 18mm wide and 10mm-30mm long depending on entry points.
* Accommodate wire dimensions between 0.5mm and 2.5mm.
* Fully comply to IEC/EN 60998-1 and 60998-2-2 standards.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

External display advertising is an effective means of communicating a message to a wide and diverse audience. Stock Displays is one of the UK’s leading manufacturers of high-spec internal and external display products for use in public areas. With several prestigious clients Stock Displays needed to be sure that its products can withstand daily use and continue to display advertising messages in wind, rain and snow.

Fortunately Hylec-APL was able to offer a solution which met all of the company’s needs.

*  All-new Mini-TEETUBE series TH391 is the latest addition to the innovative TEE family of weatherproof products which offer quick and easy installation with IP68 ingress protection.

*  TH391 is one of the smallest IP68 electrical connectors on the market which doesn’t depend on silicone gel to prevent moisture ingress.

*  The connector uses a unique design which sees the terminal block forming part of the external housing to achieve its tiny footprint.

* IP68 seal is then formed using the dome topped cable glands which form the entry points of the connector.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL has introduced a new comprehensive range of Steatite ceramic terminal blocks which are ideal for wire termination in demanding high temperature applications.

The Steatite ceramic terminal blocks have several characteristics which make them advantageous over existing porcelain ceramic products. These include higher density, better bending/compression strength, greater elasticity, higher dielectric strength and being non-flammable and temperature resistant with dimensional stability up to 1,000˚C.

*  The terminal blocks are suitable for use in applications with continuous temperatures of up to 350˚C.
*  Range is available with two or three poles and in a choice of sizes.
*  Steatite terminal blocks include screw mounting holes which are M3, M3.5 or M4 in size.
*  Steatite, or soapstone, can be easily shaped and its electrical characteristics make it ideal as an insulator or housing for electrical components.
*  The range complements Hylec’s existing line of polyamide and polypropylene products.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

'Kwik-Snap' terminal blocks from Hylec-APL can reduce installation time on site by allowing users to remove the desired number of poles from a strip with the simple twist of the hand. Unlike similar products on the market, the Kwik-Snap is made from polypropylene which eliminates the risk of fire from arcing.

* Quickly snap off the required number of poles – No tools required, saves time, saves money.
*  Pole divider still strong enough to support mounting screws for surface mounting.
*  Plated metals inserts with zinc-plated steel screws.
*  12 pole strips with wiring capacity from 4mm2 to 16mm2
*  Suitable for ambient temps to 85 degrees C
*  High melting point removes risk of fire from arcing.
*  VDE approved.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/