For simple ON/OFF cycling with extreme time parameters, a wide universal supply voltage capability and clear and easy settings, Finder’s new 88.92 timer with Asymmetric Flasher (Recycling) provides an attractive solution that’s particularly suitable for operator adjustment from an equipment’s front panel.

The 88.92 offers a wide option of time ranges from times as short as 50 milliseconds and as long as 300 hours—a ratio of up to 800,000:1 should you need it—ideal for driving warning devices such as sirens or flashing lamps, or for mixing or dosing liquids or other materials.

It’s attractive for front of panel mounting and adjustment, but equally appealing for internal mounting where visibility is restricted or otherwise difficult.

The product is available in a version starting with the OFF state, and a version starting with the ON state. The main features include:
•  12 .... 240 VAC/DC power supply
•  2 changeover contacts rated 8A 250V AC1
•  Adjustable time delay: 0.05 s .... 300 h
•  UL approval

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Schurter now equips its FPG7 shock-safe SMD fuseholder with two stabilizing posts. The added posts extend from the existing front standoffs, providing increased stability during board assembly, and when replacing the fuse. The FPG7 is also the only shock-safe SMD fuseholder on the market for 5x20 mm cartridge fuses.

The trend towards SMD applications continues unabated. In response, Schurter already offers a large selection of SMD components such as fuses and fuseholders in its product range. As part of the Schurter range, the FPG7offers the only shock-safe SMD fuseholder on the market. The newly added stabilizing posts improve the design, by optimizing the stability of the fuseholder during the mounting and soldering process of the PCB. Further, the stabilizing posts help absorb the axial forces that arise when the fuse is being replaced.

With rated power acceptance of up to 2.5 W at 10 A / 250 VAC according to IEC, combined with rated current of up to 16 A at 400 VAC according to UL/CSA, the FPG7 is the ideal solution for applications requiring primary protection. Overall, the FPG7 is well suited for applications where the following requirements must be met: SMD assembly, compact design, primary protection, and external access to fuses. Specific applications in this regard include industrial and medical equipment as well as household appliances. Depending on the application, the customer can select between two fuse cap options, either a slotted version for screw driver access or fingergrip version.

The FPG7 is manufactured with RoHS-conforming materials that are temperature resistant and designed for reflow soldering processes. These materials today meet the requirements for equipment in unattended operation according to IEC 60335-1 and the intensified glow-wire test requirements according to IEC 60695-2. Furthermore, the FPG7 achieves a protection class of IP40 and a shock-safe category of PC2. The blister tape packaging option enables efficient manufacturing using automatic placement machines. All versions of the FPG7 have VDE and cURus approvals.

Technical data:
- Rated voltages up to 400 VAC
- Rated currents up to 16 A
- Rated power consumption according to IEC up to 2.5 W at 10 A
- Protection class IP40
- Shock-safe category PC2
- VDE and cURus approvals

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Hylec-APL now offers the DE01 range of pre-installed control stations which combine tough IP67 enclosures with hard wearing push button and selector switches reducing time spent on-site. Installation is further aided thanks to unique, snap-on brackets for easy wall, chassis and DIN mounting.

*  Variety of sizes and depths to accommodate different application requirements
*  Thick walls constructed from robust ABS material
*  Up to IP67 protection depending on switch options
*  Snap-on bracket mounting available for DIN rail or chassis / wall mounting
*  Selection of push button and selector switch types and combinations are available
*  Suitable for indoor and outdoor use in domestic, commercial and industrial applications
*  All products comply fully with ROHS and REACH standards

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/

Cynergy3 Components has introduced the D200 Series high voltage reed relays which combine a high power 200W switching capacity with isolation of 7kV across the contacts.

The D200 relays come in the same package and pin-out as the popular D Series. The switching performance is achieved through the use of high vacuum reed switches with tungsten contacts. Typical D200 Series applications include test equipment, high voltage power supplies, medical equipment, or any application requiring increased safety margins on the switching power ratings.

D200 Series relays come with Normally-Open (NO) contacts. Models are available with 5V, 12V and 24V coil operation. The maximum switching voltage is 2.5kV. The contacts are capable of switching 3Adc, or carrying a maximum current of 5Adc.

Cynergy3 Components has been manufacturing high voltage reed switches and reed relays for over 40 years. All relays are assembled in the state-of-the-art facility located in Wimborne UK. Cynergy3 Components also manufactures a wide range of sensor products including Liquid Level, Liquid Flow and Pressure Sensors. All products are stocked and available through distributors worldwide.

Simon Dear, Sales & Marketing Manager at Cynergy3 Components comments: “The D Series relay has long been the favourite choice for engineers with demanding high voltage applications. The new D200 Series provides engineers with a solution for critical applications where increased power handling capability is a prime concern”.

.

Enquiry Form: https://www.epreston.co.uk/contact/

Home Page: https://www.epreston.co.uk/epblog/