Four new high capacity heat sinks, optimized to take full advantage of Crydom panel mount solid state relays maximum ratings, are now available for use in heating, lighting, motion and power control applications
Crydom, a brand of Custom Sensors & Technologies (CST), announces the availability of 4 new Heat Sinks designed specifically for use with single, dual and 3 phase Solid State Relays. The new models, rated at 0.25, 0.36. 0.7 and 1.0 degrees C per watt, expand the existing Crydom HS series of heat sinks with ratings from 0.5 to 5.0 degrees C per watt.
Each new black anodized heat sink is designed to accept one, two or three single phase or dual output standard panel mount Solid State Relays, or one 3 phase Solid State Relay or high power output single phase Solid State Relay. Thermal ratings are based upon convection cooling in a typical ambient temperature range of 20 to 60 degrees Celsius.
.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
The Kwik Fix cable gland from Hylec-APL has been designed to offer installers speedy installation for applications where access to the interior of a bulkhead or enclosure is restricted. The gland, which is especially suited to switch cabinets and cooling and heating systems, can be used to form a quick, easy IP68 cable transit.
Easy Installation Process
* No separate locknut required
* Assembly from one side only
* Available in M16/20/25
* Polyamide PA6 V2 Black and Grey
* IP68 protection
* Applies to Hylec cable gland series K341
.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
The 39 Series MasterINTERFACE, next-generation interface has extended its range with the addition of models featuring “push-in” terminals – the innovative connector system which allows the direct entry of solid wires without the need to open the clamp.
As with the screw terminal models, the extended range consists of 5 types, all available with electromechanical relays (1 changeover contact 6 A) or with solid state relays (1 NO 2A at 24 V DC or 230 V AC):
• Master BASIC (code 39.01 relay, 39.00 SSR)
• Master PLUS (code 39.61 relay, 39.60 SSR)
• Master INPUT (code 39.71 relay, 39.70 SSR)
• Master OUTPUT (code 39.51 relay, 39.50 SSR)
• Master TIMER (code 39.91 relay, 39.90 SSR)
Each type will be available with the same input voltage versions as the current models with screw terminals, although both screw and push-in types will now offer the following additional versions:
MasterBASIC – with AC 110 ... 125V AC/DC (using new sockets: 93.61.0.125 and 93.60.0.125)
MasterINPUT – compatible with the sensors with current less than 100 mA (using new sockets 93.64.7.024 and 93.67.7.024).
All 39 Series accessories (ie. the output fuse module 093.63, the 093.16 jumper links in Blue, Red and Black, the 093.60 separator and the 093.68.14.1 “MasterADAPTER”) can be used with the new sockets.
.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
With the SHF 6.3x32, SCHURTER is expanding its range of high-voltage equipment fuses. The high breaking capacity of 1500 A at a rated voltage of 500 VAC opens up many interesting fields of application. The SHF 6.3x32 is available as cartridge or pigtail version.
.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
7 new Chronos 2 Timers, 2 new Level Control Relays and 2 new Phase Control Relays are now available in a more compact DIN Rail package ideal for modular use
Crouzet Control, a brand of Custom Sensors & Technologies (CST), is pleased to announce the availability of 11 redesigned Chronos 2 Timers and Control Relays now available in an improved DIN rail modular housing with the same profile as the Crouzet C-lynx product family.
The 7 new 22.5 mm DIN Rail mounted Chronos 2 Timers (RA2R1, RQR1, RQR6, RU2R1 RU2R3, RU2R4 & RX2R1) replace timers previously offered in a 22.5 mm wide industrial housing. The new 22.5mm DIN rail mounted housing is also similar to the new 17.5 mm Chronos 2 Timers featuring the same terminal block position for perfect panel alignment. The new 22.5 mm timers also feature 2 SPDT relays rated at 8 A / 250 VAC and are just 8 mm higher than the 17.5 mm version with one output relay. New Chronos 2 timers have the same rated supply voltage and electrical specifications as previous industrial housing versions.
ENR and ENRM Level Control Relays have also been redesigned in a new 22.5 mm DIN Rail housing replacing 22.5 mm wide industrial models. A new universal supply voltage of 24 to 240 VAC VDC allows them to replace 8 existing part numbers with similar or improved features per model.
The new 17.5 mm MWS Phase Control Relay featuring an 8 A output rating replaces both the 17.5 mm MWS and 22.5 mm EWS series. The redesigned 22.5 mm EWS2 replaces the existing EWS2 featuring a more compact housing allowing modular installation.
All new Chronos 2 Timers and Control Relays are C-UL-US Listed, CE certified to the IEC Low Voltage Directive and compliant with the RoHS Directive.
.
Enquiry Form: https://www.epreston.co.uk/contact/
Home Page: https://www.epreston.co.uk/epblog/
© E. Preston (Electrical) Ltd 2024.
UK distributor of electrical and electronic components.